RealFlight G6.5

技嘉

增設轉向鏡頭
A8 搖桿
Controller>select controllere>2.InterLink Transmitter 11 chemmal~
Aircraft>Airframe>Fuselage>名稱位置 點右滑鼠鍵>Add>Add Movable Pod活動關節>畫面右邊>算好位置>約Y=-2.778, Z=.486.~
Rotation (Maximum)(deg) X=0, Y=9, Z=90.0
Rotation (Minimum)(deg) X=0, Y=9, Z=-90.0
Weight(oz):0
X Rotation Servo:Smoke Servo
X Rotation Servo Reverse:Yes
Y Rotation Servo:<No Servo>
Y Rotation Servo Reverse:No
Z Rotation Servo:Smoke Servo
Z Rotation Servo Reverse:No
Movable Pod名稱位置 點右滑鼠鍵>Add>Add Camera>畫面右邊參數不用去動它~

設在1段開關Smoke Ch8位置 鏡頭無法至中 活動關結 沒有適合通道>Aircraft>Airframe>Electronics>名稱位置 點右滑鼠鍵>Add>Add Physics Servo(加入之後 名稱改為Pilot Servo)>畫面右邊>Inport for This Servo>Receiver Channel 7~
活動關結 X \ Z Rotation Servo改為Pilot Servo~

鏡頭有些偏左>Aircraft>Airframe>Electronics>Camera>畫面右邊>Pan Angle(deg):約3.9.~

按F4 轉為座艙 左右轉向~

Controller>select controllere>3.InterLink Plus G3~
Rotation (Maximum)(deg) X=0, Y=9, Z=102.0
Rotation (Minimum)(deg) X=0, Y=9, Z=-78.4
(3位開關 只有1段可用 就不設在 3.InterLink Plus G3這裡)~