| DS-1210 |
| Dead band: [td]0.002ms (Default) |
| Control System: [td] +Pulse Width Control |
| Working frequence: [td]120Hz |
| (RX) Required Pulse: [td]3.0~5.0 Volt Peak to Peak Square Wave |
| Operating Voltage: [td]4.8~6.0 V DC Volts |
| Operating Temperature Range: [td] -10 to + 60 Degree C |
| Operating Speed (4.8V): [td=1,1,409]0.15 sec/60° degrees at no load |
| Operating Speed (6V): [td]0.12 sec/60° dagrees at no load |
| Stall Torque (4.8V): [td]8.05 kg-cm (292.4 oz/in) |
| Stall Torque (6V): [td]10 kg-cm (365.3 oz/in) |
| 360° Modifiable: [td]NO |
| Motor Type: [td]DC Motor |
| Potentiometer Drive: [td]Direct Drive |
| Driver Type: [td]FET |
| Bearing Type: [td]Dual Ball Bearings |
| Gear Type: [td]metal gear |
| Programmable: [td]NO |
| Connector Wire Length: [td]15.0 cm (5.9 in) |
| Dimensions: [td]40X20X40.30 mm (1.5748X0.7874X1.58 in) |
| Weight: [td]56 g (1.97 oz) |