新車即將上市: Trail Finder 2

way6317

What's included:

• 1x Trail Finder 2 Truck Kit w/Mojave Body Set

This is a kit that requires building time (appro. 2-3 hours) and electronics.

Required to Complete:
Truck Kit

• Hex Drivers  (1.5mm, 2mm, 2.5mm)
• Long Nose Pliers
• Thread Lock (Blue) V-HOUPT42
• Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Body Kit

• Modeling / Craft Knife
• Curved Lexan Scissors  V-DUB2330
• Side Cutters
• Instant glue / Plastic Cement  (prefer non whitening)
• Hex Drivers (1.5mm, 2mm)
• Cross Phillips Screwdrivers (small)

Electronics

• Motor  (35t, 45t, or 55t)
• Electronic Speed Controller "ESC"  (Z-E0007)
• Radio and Receiver (3 channel or more)  (3 Channel Z-R0009, or 4 Channel Z-R0006)
• 2x Standard Size Servo (Z-E0012)
• Battery (Consult your "ESC" manual)  6 cell NIMH, or Lipo battery
• Charger (Consult your battery guide)  Chargers

Hopups:

• Bench Seat (Z-B0032)
• Winch (Winch options)
• Rear 4 Link Kit (Coming Soon) (Z-S0603)
• XVD For Yota Front Axle (Z-S0342)
• U-Bolt Kit for Yota Axles (Z-S0068)
• Scale Aisin/Yota Style Hubs (Z-S0196)
• Scale Front Locking Hubs (Z-S0194)
• Rear Scale Hubs (Z-S0175)
• Red Super Soft Leaf Springs (Z-S0570)
• Shooter Shackles "Black" (Z-S0225) "Silver" (Z-S0502)
• T-Box Shackles (Z-S0250)
• Dual Spring 80mm Scale Shocks for front "Black" (Z-S0184)   "Blue/Silver"  (Z-D0017)
• Dual Spring 100mm Scale Shocks for rear "Black" (Z-D0011)   "Blue/Silver"  (Z-D0018)
• K44 Scale Front Axle (Z-A0048)
• K44 Scale Rear Axle (Z-A0049)
• Mickey Thompson 1.55 Baja MTZ Scale Tires  (Z-T0058)
• Mickey Thompson 1.55 Baja Claw TTC Scale Tires (Z-T0064)
• Interco IROK 1.55 Scale Tires (Z-T0056)

Items of Interest: (not required for completion)

• Paint for body
• Paint for Body lenses (V-TAM81526,  V-TAM81527)

Additional Notes for assembly:
Note for Body assembly  (Download Here)
Note for Axle assembly  (Download Here)
Instruction Manuals
Trail Finder 2 Kit Instructions  (Download Here)

Mojave Body Kit Instructions  (Download Here)

way6317

感覺整體感不錯捏.. 貨斗也改好了..這車殼好像不是用田宮的???還是rc4wd自己射的嗎?

way6317

但是..防撞桿看起來好像是塑膠件..??

焦桃牌

RC4WD近年來都把零件發包到祖國去製造
所以最快速的方式應該是把田宮殼直接翻模再修改局部做成兩件式
後視鏡改成那樣應該是不想付出高額權利金吧
變速箱看起來蠻不賴唷

0913355126

這台靓車應該不會太便宜，又要拐小朋友了。      
永遠留不住。      嗚

neo2000

這次把山豬整隻調理好, 就看大家買不買單了,
致於價格.......
放心好了, RC4WD重砲級的, 砍小朋友也是毫不留情的
哈~~~~

[ 本帖最後由 neo2000 於 2012年1月24日 10:39 PM 編輯 ]