全新韓國INSPIRE 60三滴機(已售出)

idofly1

沒空裝機　　原價六千　　現售四千五含運以

[ 本帖最後由 idofly1 於 2009年11月3日 08:19 AM 編輯 ]

TOC菜鳥

原帖由 idofly1 於 2009年11月1日 11:05 PM 發表
沒空裝機　　原價六千　　現售四千五含運

請問這是油ㄉ還是電ㄉ

idofly1

都可以　　木精用63~90　　電的我就不知了

EASONF-16

63~90，是指2C-60   4C-91嗎，有基本數據(長寬高及重量嗎)

idofly1

FLITON原廠網址
http://fliton.com/sub/inspire_60_acro.php


SPECIFICATIONS
Wingspan : 1,540 mm / 60.62 inches
Lenght : 1,570 mmmm / 61.81 inches
Flying Weight : 2,400 ~ 2,800 g / 5.29 ~ 6.17 (electric) lbs.
Empty Weight : 1,338 g / 47.23 oz (2.95 lbs)
Main Wing Area : 46 sq dm2
Wing Loading : 19 oz/ft2

RECOMMENDED SETUP
Below are tested recommendations. Individual performance results may vary,
use at customer's own discretion.

Moderate Flying Setup
Servos: (4) Hitec HS-5245MG
Engine: Saito 82 or YS 63 (25% Nitro)
Motor: Hacker A50 :16S
             E-Flite Power 46BL
Battery: 6s2p (2)4200mAh 3s2p in series
Propeller: 17 x 10 E or 14 x 4 Wood (Glow)
Speed Controller: Opto 77A
Center of Gravity: 3/4" behind wing tube

Advanced Flying Setup
Servos : (3) Hitec HS-5245 Digital Servos
               (1) Hitec HS-5945 Digital Rudder Servo
Engine: Saito 100 or YS 91 (15~25% Nitro)
Motor: Hacker A50:12S
             E-Flite Power 60BL or AXI 4130/16
Battery: 6s2p (2)4200mAh 3s2p in series
Propeller: 17 x 8 E or 14 x 4 Wood (Glow)
Speed Controller: Opto 77A
Center of Gravity: 3/4" behind wing tube

jackoning

飛機不知賣出了沒?請收pm...